We found a match
Your institution may have rights to this item. Sign in to continue.
- Title
Design and performance of a capacitance sensor for filling rate in screw feeding pipes.
- Authors
Zhang, Xiliang; Cui, Shoujuan; Xu, Kun; Sun, Xiang
- Abstract
Powder flow abounds in industrial and agricultural production such as in chemical industry, food processing, and agricultural methods, where filling rate is an important operating parameter, especially for screw quantitative feeding of powder. In order to test the filling rate in screw feeding pipe with a special feed divider, a new capacitance sensor consisted of 12 spiral electrodes, 12 radial electrodes, and a shield cover is presented. Then to optimise the geometry of the capacitance sensor, the influence of parameters such as the radius of the sensor shield, radial electrode inserted depth, and electrode field angle on the sensor is analysed through finite‐element analysis. The optimal geometry dimensions are as follows: radius of the shield is 27 mm, electrode field angle is 27° and radial electrode insert depth is 3 mm. On the basis of these parameters, the sensor is developed and its performance is evaluated. The results show that the relative errors of the measured values are no more than 7%. The developed capacitance sensor can be applied in filling rate measurement of screw feeding production.
- Publication
IET Science, Measurement & Technology (Wiley-Blackwell), 2018, Vol 12, Issue 7, p925
- ISSN
1751-8822
- Publication type
Article
- DOI
10.1049/iet-smt.2018.5296