We found a match
Your institution may have rights to this item. Sign in to continue.
- Title
Nanocomposite SAC solders: the effect of adding CoPd nanoparticles on the morphology and the shear strength of the Sn–3.0Ag–0.5Cu/Cu solder joints.
- Authors
Yakymovych, Andriy; Slabon, Adam; Švec, Peter; Plevachuk, Yuriy; Orovcik, Lubomir; Bajana, Otto
- Abstract
The effect of bimetallic monodisperse CoPd nanoparticles on the microstructure and the shear strength of the Cu/ SAC305/Cu solder joint was investigated. The nanocomposite Sn–3.0Ag–0.5Cu (SAC305) solders with 0.1, 0.3, 0.5, and 1.0 wt% nanoCoPd were prepared through a paste mixing method. The employed bimetallic nanoparticles were produced via a modified oleylamine method. The microstructural analysis of as-solidified Cu/solder/Cu joints was performed by scanning electron microscopy. The results showed that initial additions of CoPd nanoparticles into the SAC305 solder promoted the growth of the interfacial planar-type Cu3Sn IMC layer; while the average thickness of the interfacial scallop-type Cu6Sn5 IMC layer slightly decreased. Further additions of the nanosized CoPd admixtures to the SAC305 solder paste lead to a significant increase of the average thickness of the Cu6Sn5 intermetallic compound layer up to 40%. The shear strength measurements were performed to investigate a relationship between the microstructure and mechanical properties of the investigated solder joints. The results indicated a decrease in the shear strength of the SAC305 solder joint by addition of 0.1 wt% CoPd NPs, while a difference in absolute values between solder joints with 0.3, 0.5, and 1.0 wt% nanoCoPd was practically insignificant.
- Subjects
SOLDER joints; COPPER-tin alloys; SHEAR strength; NANOPARTICLES; OBSTRUCTIVE lung diseases; SOLDER &; soldering
- Publication
Applied Nanoscience, 2020, Vol 10, Issue 12, p4603
- ISSN
2190-5509
- Publication type
Article
- DOI
10.1007/s13204-020-01325-x