We found a match
Your institution may have rights to this item. Sign in to continue.
- Title
Tribological and mechanical properties of carbon‐nanofiber‐filled polytetrafluoroethylene composites.
- Authors
Yijun Shi; Xin Feng; Huaiyuan Wang; Xiaohua Lu; Jianyi Shen
- Abstract
The effects of various filler concentrations (0.1, 0.5, 1, 1.5, 2, 2.5, and 3 wt %) on the tribological and mechanical properties of carbon‐nanofiber (CNF)‐filled polytetrafluoroethylene (PTFE) composites were studied. Moreover, the influence of various loads (50, 100, 150, and 200 N) and sliding velocities (0.692 and 1.39 m/s) on the friction and wear behaviors of the PTFE composites was investigated. The results showed that the friction coefficients of the PTFE composites decreased initially up to a 0.5 wt % filler concentration and then increased, whereas the antiwear properties of the PTFE composites increased by 1–2 orders of magnitude in comparison with those of pure PTFE. The composite with a 2 wt % filler concentration had the best antiwear properties under all friction conditions. The friction coefficients of the CNF/PTFE composites decreased with increases in the load and sliding velocity, whereas the wear volume loss of the PTFE composites increased. At the same time, the results also indicated that the mechanical properties of the PTFE composites increased first up to a 1 wt % filler concentration and then decreased as the filler concentration was increased above 1 wt %. In comparison with pure PTFE, the impact strength, tensile strength, and elongation to break of the PTFE composites increased by 40, 20, and 70%, respectively, at a 1 wt % filler concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2430–2437, 2007
- Subjects
CARBON; TRIBOLOGY; ETHYLENE; POLYTEF
- Publication
Journal of Applied Polymer Science, 2007, Vol 104, Issue 4, p2430
- ISSN
0021-8995
- Publication type
Article
- DOI
10.1002/app.23951