We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Effect of soldering time on the microstructure and mechanical properties of SnBi/SACBN/Cu solder joint.
- Authors
Liu, Yang; Chang, Jian; Xue, Yuxiong; Cao, Rongxing; Li, Hongxia; Zheng, Shu; Zeng, Xianghua
- Abstract
To improve the mechanical properties of SnBi solder joints, Sn–Ag–Cu–Bi–Ni (SACBN) bumps were pre-soldered on the Cu pads, and thus the SnBi/SACBN/Cu solder joints were obtained in this work. By comparing with SnBi/Cu, the effects of soldering time on the microstructure and mechanical properties of SnBi/SACBN/Cu solder joint were investigated. Experimental results show that increasing soldering time suppresses the composition segregation in SnBi bulk, but it leads to the coarsening of β-Sn and Bi-rich phases. As the soldering time increases, the interfacial IMC layers in the SnBi/Cu and the SnBi/SACBN/Cu solder joints gradually become thicker. The growth of the (Cu, Ni)6Sn5 interfacial IMC in SnBi/SACBN/Cu is mainly based on solid–solid diffusion. Its growth rate is lower than that of the IMC whose growth is dominantly due to liquid–solid diffusion in SnBi/Cu. The addition of SACBN bulk decreases the hardness of the SnBi bulk. Meanwhile, the hardness shows a decreasing trend as the soldering time increases. When the soldering time is 40 s and 160 s, SACBN bulk suppresses the propagation of fracture in SnBi bulk and improves the shear strength of the solder joint. As the soldering time reaches 280 s, the shear strength of the SnBi/SACBN/Cu solder joint decreases, and the fracture is mainly located in the SnBi bulk.
- Subjects
SOLDER joints; SOLDER &; soldering; COPPER-tin alloys; CRACK propagation (Fracture mechanics); SHEAR strength; MICROSTRUCTURE
- Publication
Journal of Materials Science: Materials in Electronics, 2022, Vol 33, Issue 10, p8270
- ISSN
0957-4522
- Publication type
Article
- DOI
10.1007/s10854-022-07981-9