Found: 298
Select item for more details and to access through your institution.
Characterization of compressive fatigue behavior and acoustic emission analysis of Ti6Al4V cellular lattice materials fabricated by laser powder bed fusion.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 10, p. 3910, doi. 10.1111/ffe.14387
- By:
- Publication type:
- Article
Scale‐dependent mechanical performance variations in polylactic acid lattice structures fabricated via additive manufacturing.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 10, p. 3561, doi. 10.1111/ffe.14386
- By:
- Publication type:
- Article
On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 10<sup>9</sup> cycles.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 11, p. 4356, doi. 10.1111/ffe.14419
- By:
- Publication type:
- Article
Low cycle fatigue behavior of AZ31 magnesium alloy joined by friction stir welding.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 11, p. 4165, doi. 10.1111/ffe.14411
- By:
- Publication type:
- Article
Numerical Investigation on the Compressive Behaviors of Islamic Geometric Patterns Inspired Architectured Material.
- Published in:
- Macromolecular Symposia, 2024, v. 413, n. 3, p. 1, doi. 10.1002/masy.202300195
- By:
- Publication type:
- Article
An experimental method for evaluating mode II stress intensity factor from near crack tip field.
- Published in:
- International Journal of Fracture, 2016, v. 197, n. 1, p. 119, doi. 10.1007/s10704-015-0062-x
- By:
- Publication type:
- Article
Averaged strain energy density and J-integral for U- and blunt V-shaped notches under torsion.
- Published in:
- International Journal of Fracture, 2014, v. 188, n. 2, p. 173, doi. 10.1007/s10704-014-9953-5
- By:
- Publication type:
- Article
Fictitious Notch Rounding Concept Applied to V-Notches with End Holes Under Mode I Loading.
- Published in:
- International Journal of Fracture, 2011, v. 171, n. 1, p. 91, doi. 10.1007/s10704-011-9626-6
- By:
- Publication type:
- Article
On the Presence of the Out-of-Plane Singular Mode Induced by Plane Loading With K = K = 0.
- Published in:
- International Journal of Fracture, 2011, v. 167, n. 1, p. 119, doi. 10.1007/s10704-010-9530-5
- By:
- Publication type:
- Article
Transverse singular effects in V-shaped notches stressed in mode II.
- Published in:
- International Journal of Fracture, 2010, v. 164, n. 1, p. 1, doi. 10.1007/s10704-010-9449-x
- By:
- Publication type:
- Article
Three-dimensional linear elastic distributions of stress and strain energy density ahead of V-shaped notches in plates of arbitrary thickness.
- Published in:
- International Journal of Fracture, 2004, v. 127, n. 3, p. 265, doi. 10.1023/B:FRAC.0000036846.23180.4d
- By:
- Publication type:
- Article
Correction to: Exploring the hybrid metal extrusion and bonding process for butt welding of Al-Mg-Si alloys.
- Published in:
- 2018
- By:
- Publication type:
- Correction Notice
Exploring the hybrid metal extrusion and bonding process for butt welding of Al-Mg-Si alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2018, v. 98, n. 5-8, p. 1059, doi. 10.1007/s00170-018-2234-0
- By:
- Publication type:
- Article
Comportamento a fatica di un acciaio strutturale zincato a caldo in presenza di intagli e saldature.
- Published in:
- Ingegneria Ferroviaria, 2016, v. 71, n. 2, p. 105
- By:
- Publication type:
- Article
A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 7/8, p. 1911, doi. 10.1007/s00170-020-05949-9
- By:
- Publication type:
- Article
Fracture tests under mixed mode I + III loading: An assessment based on the local energy.
- Published in:
- International Journal of Damage Mechanics, 2017, v. 26, n. 6, p. 881, doi. 10.1177/1056789516628318
- By:
- Publication type:
- Article
Experimental Investigation of Thermal Passive-Reactive Sensors Using 4D-Printing and Shape-Memory Biopolymers.
- Published in:
- Sustainability (2071-1050), 2022, v. 14, n. 22, p. 14788, doi. 10.3390/su142214788
- By:
- Publication type:
- Article
Modelling and Optimizing Structural Behavior of Advanced Materials for Aerospace.
- Published in:
- International Journal of Aerospace Engineering, 2018, p. 1, doi. 10.1155/2018/6296145
- By:
- Publication type:
- Article
Pyrolysis Kinetics and Flammability Evaluation of Rigid Polyurethane with Different Isocyanate Content.
- Published in:
- Molecules, 2021, v. 26, n. 8, p. 2386, doi. 10.3390/molecules26082386
- By:
- Publication type:
- Article
The Flame Retardancy of Polyethylene Composites: From Fundamental Concepts to Nanocomposites.
- Published in:
- Molecules, 2020, v. 25, n. 21, p. 5157, doi. 10.3390/molecules25215157
- By:
- Publication type:
- Article
On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures.
- Published in:
- Nature Communications, 2022, v. 13, n. 1, p. 1, doi. 10.1038/s41467-022-30873-9
- By:
- Publication type:
- Article
On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures.
- Published in:
- Nature Communications, 2022, v. 13, n. 1, p. 1, doi. 10.1038/s41467-022-30873-9
- By:
- Publication type:
- Article
Developing an artificial intelligent model for predicting combustion and flammability properties.
- Published in:
- Fire & Materials, 2022, v. 46, n. 5, p. 830, doi. 10.1002/fam.3030
- By:
- Publication type:
- Article
The Effect of Holding Time on Dissimilar Transient Liquid-Phase-Bonded Properties of Super-Ferritic Stainless Steel 446 to Martensitic Stainless Steel 410 Using a Nickel-Based Interlayer.
- Published in:
- Micromachines, 2022, v. 13, n. 11, p. 1801, doi. 10.3390/mi13111801
- By:
- Publication type:
- Article
A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites.
- Published in:
- Micromachines, 2021, v. 12, n. 6, p. 704, doi. 10.3390/mi12060704
- By:
- Publication type:
- Article
Crack simulation for the cover of the landfill -- A seismic design.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2023, v. 17, n. 65, p. 112, doi. 10.3221/IGF-ESIS.65.09
- By:
- Publication type:
- Article
Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2022, n. 60, p. 346, doi. 10.3221/IGF-ESIS.60.24
- By:
- Publication type:
- Article
Strain energy density criterion as failure assessment for quasi-static uni-axial tensile load.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2021, n. 57, p. 331, doi. 10.3221/IGF-ESIS.57.24
- By:
- Publication type:
- Article
Experimental investigation of cracking behaviors of ductile and brittle rock-like materials.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2021, n. 56, p. 16, doi. 10.3221/IGF-ESIS.56.02
- By:
- Publication type:
- Article
Mechanical properties of the most common European woods: a literature review.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2020, n. 54, p. 249, doi. 10.3221/IGF-ESIS.54.18
- By:
- Publication type:
- Article
A coupled elastoplastic damage model for brittle rocks.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2020, n. 53, p. 446, doi. 10.3221/IGF-ESIS.53.35
- By:
- Publication type:
- Article
Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2020, n. 53, p. 434, doi. 10.3221/IGF-ESIS.53.34
- By:
- Publication type:
- Article
Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 44, doi. 10.3221/IGF-ESIS.49.06
- By:
- Publication type:
- Article
Localized wrinkling of metal films on elastic and liquid substrates.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 48, p. 648, doi. 10.3221/IGF-ESIS.48.62
- By:
- Publication type:
- Article
A novel algorithm for crack path identification based on infrared images.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 48, p. 116, doi. 10.3221/IGF-ESIS.48.14
- By:
- Publication type:
- Article
Crack propagation in a brittle DCB specimen assessed by means of the Williams' power expansion.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 48, p. 34, doi. 10.3221/IGF-ESIS.48.05
- By:
- Publication type:
- Article
Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 48, p. 18, doi. 10.3221/IGF-ESIS.48.03
- By:
- Publication type:
- Article
Assessment of tensile and fatigue behavior of PEEK specimens in a physiologically relevant environment.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 47, p. 425, doi. 10.3221/IGF-ESIS.47.33
- By:
- Publication type:
- Article
The Strain energy density to estimate lifetime of notched components subjected to variable amplitude fatigue loading.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 47, p. 383, doi. 10.3221/IGF-ESIS.47.28
- By:
- Publication type:
- Article
Influence of notch sensitivity and crack initiation site on low cycle fatigue life of notched components under multiaxial non-proportional loading.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 47, p. 126, doi. 10.3221/IGF-ESIS.47.10
- By:
- Publication type:
- Article
Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2018, v. 12, p. 121, doi. 10.3221/IGF-ESIS.45.10
- By:
- Publication type:
- Article
Development of an optimal process for friction stir welding based on GA-RSM hybrid algorithm.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2018, v. 12, p. 106, doi. 10.3221/IGF-ESIS.44.09
- By:
- Publication type:
- Article
An innovative micromechanics-based three-dimensional long-term strength criterion for fracture assessment of rock materials.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2018, v. 12, p. 64, doi. 10.3221/IGF-ESIS.44.06
- By:
- Publication type:
- Article
Design of Experiment as a powerful tool when applying Finite Element Method: a case study on prediction of hot rolling process parameters.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2018, v. 12, p. 1, doi. 10.3221/IGF-ESIS.44.01
- By:
- Publication type:
- Article
Multiaxial fatigue strength of titanium alloys.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2017, v. 11, p. 79, doi. 10.3221/IGF-ESIS.41.12
- By:
- Publication type:
- Article
Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2017, v. 11, p. 66, doi. 10.3221/IGF-ESIS.41.10
- By:
- Publication type:
- Article
Crack initiation life in notched Ti-6A1-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2017, v. 11, p. 8, doi. 10.3221/IGF-ESIS.41.02
- By:
- Publication type:
- Article
Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2016, v. 10, p. 215, doi. 10.3221/IGF-ESIS.38.29
- By:
- Publication type:
- Article
Two-parameter fracture model for cortical bone.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2016, v. 10, p. 215, doi. 10.3221/IGF-ESIS.37.28
- By:
- Publication type:
- Article
Local strain energy density to assess the multiaxial fatigue strength of titanium alloys.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2016, v. 10, p. 69, doi. 10.3221/IGF-ESIS.37.10
- By:
- Publication type:
- Article