We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Eucalyptus globulus Stumpwood as a Raw Material for Pulping.
- Authors
Gominho, Jorge; Lopes, Cátia; Lourenço, Ana; Simões, Rogério; Pereira, Helena
- Abstract
In this study, Eucalyptus globulus stumpwood samples collected from six different sites in Portugal were evaluated for their ease of pulping, using two delignification processes (kraft and alkaline sulfite-anthraquinonemethanol (ASAM)). Morphologically, the stumpwood included fibers with a mean length of 0.930 mm, diameter of 21.4 μm, lumen width of 9.1 μm, and cell-wall thickness of 6.1 μm. The Runkel ratio varied between 1.0 and 1.9, and the slenderness ratio ranged between 50.6 and 35.1. ASAM pulps presented higher yields and kappa numbers (49.3% and 36, respectively) when compared to kraft pulps (42.7% and 14, respectively). Extractive-free material increased pulp yield (51.7% and 47.5% for ASAM and kraft, respectively) and decreased kappa number (18 and 11). The kraft pulps showed a coarseness of 0.096 mg/m, curl of 5.2%, and 16.7% kinked fibers, while for the ASAM pulps, these values were 0.105 mg/m, 5.2%, and 16.3%, respectively.
- Subjects
EUCALYPTUS globulus; STUMPWOOD; DELIGNIFICATION; SULFATE pulping process; MECHANICAL buckling
- Publication
BioResources, 2014, Vol 9, Issue 3, p4038
- ISSN
1930-2126
- Publication type
Article
- DOI
10.15376/biores.9.3.4038-4049