We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Small Hall Effect Thruster with 3D Printed Discharge Channel: Design and Thrust Measurements.
- Authors
Hopping, Ethan P.; Huang, Wensheng; Xu, Kunning G.
- Abstract
This paper presents the design and performance of the UAH-78AM, a low-power small Hall effect thruster. The goal of this work is to assess the feasibility of using low-cost 3D printing to create functioning Hall thrusters, and study how 3D printing can expand the design space. The thruster features a 3D printed discharge channel with embedded propellant distributor. Multiple materials were tested including ABS, ULTEM, and glazed ceramic. Thrust measurements were obtained at the NASA Glenn Research Center. Measured thrust ranged from 17.2–30.4 mN over a discharge power of 280 W to 520 W with an anode ISP range of 870–1450 s. The thruster has a similar performance range to conventional thrusters at the same power levels. However, the polymer ABS and ULTEM materials have low temperature limits which made sustained operation difficult.
- Subjects
NASA Glenn Research Center; HALL effect thruster; MATERIALS at low temperatures; THRUST; MATERIALS testing; THREE-dimensional printing
- Publication
Aerospace (MDPI Publishing), 2021, Vol 8, Issue 8, p227
- ISSN
2226-4310
- Publication type
Article
- DOI
10.3390/aerospace8080227