We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Fabrication of Polyether–Ether–Ketone Foams with Superior Properties and Mitigated Weld Lines by Microcellular Injection Molding.
- Authors
Feng, Yu-Teng; Wang, Lin; Mi, Hao-Yang; Gu, Laifa; Dong, Binbin; Liu, Chuntai; Shen, Changyu
- Abstract
Polyether–ether–ketone (PEEK) as an engineering plastic with excellent mechanical properties requires strict processing conditions. Introducing microcells in PEEK parts is beneficial for reducing the material cost and improving their tenacity. Herein, foamed PEEK parts are fabricated using microcellular injection molding with supercritical nitrogen as the blowing agent. Using optimum processing conditions obtained from orthogonal array experiments based on finite‐element simulation, the foamed PEEK parts achieve a 10% average weight reduction and display a typical sandwich structure with an average cell size of 30 μm in the core region. The cell size is larger, whereas the cell density and skin layer thickness are smaller in the region near the gate than the region far from the gate. The foamed PEEK parts show a slight drop in the tensile modulus and tensile strength but a significant improvement in the elongation at break when compared with the solid parts. Moreover, the foamed PEEK parts with weld lines exhibit less reduction in tensile properties than the solid counterparts, attributed to their tighter interfacial adhesion at the weld line. This study successfully produces foamed PEEK parts with high weight reduction and ductility and provides insights into the weld line mitigation through microcellular injection molding.
- Subjects
POLYETHER ether ketone; FOAM; BLOWING agents; WELDED joints; PLASTICS engineering; SANDWICH construction (Materials)
- Publication
Advanced Engineering Materials, 2022, Vol 24, Issue 3, p1
- ISSN
1438-1656
- Publication type
Article
- DOI
10.1002/adem.202100766