We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
MASS TRANSFER IN SOLID-LIQUID EXTRACTION AT HIGH SOLUTE CONCENTRATIONS.
- Authors
Popa, Marcela; Iacob Tudose, Eugenia Teodora; Mamaliga, Ioan
- Abstract
The solid-liquid extraction process and some of its influencing factors such as solid-liquid ratio, temperature and salt initial amount have been investigated. Also, mathematical modeling for mass transfer coefficients calculation was applied. An inert porous solid material (coal), impregnated with 10% and 20% mass NaCl or 15% and 30% mass CaCl2, was used. The leaching was conducted in a fixed bed column, in laminar flow. The CaCl2 impregnated samples were investigated in a column with a height/diameter ratio of 2.5, at 20°C, 30°C and 40°C and the NaCl samples, in a 4.16 height/diameter ratio column, at 30°C, 40°C, 50°C, 60°C. In both cases, liquid flow rates of 3.8 L/h, 7 L/h, 10.6 L/h, 13.3 L/h were used. An increase of the extraction degree with the washing liquid flow rate (up to 10.6 L/h) indicated that the solid-liquid ratio is a crucial factor. Temperature increase has a positive influence on the extraction degree. At the beginning of the process, the salt quantity extracted from the high salt amount sample, using the lowest water flow rate has a similar value to the one extracted from the low salt amount sample, using the highest flow rate. At larger time values (t > 500 s), the extraction degree dependence on the liquid flow rate is similar for the high and low salt samples. Based on the proposed mathematical model, mean time mass transfer coefficient values k.a were calculated and compared to the experimental obtained data.
- Subjects
MASS transfer coefficients; SOLID-liquid interface thermodynamics; MATHEMATICAL models; POROUS materials; DIFFUSION
- Publication
Environmental Engineering & Management Journal (EEMJ), 2018, Vol 17, Issue 4, p827
- ISSN
1582-9596
- Publication type
Article
- DOI
10.30638/eemj.2018.084