We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement.
- Authors
Kömürcüoğlu, Meltem Bektaş; Sağırkaya, Elçin; Tulga, Ayça
- Abstract
PURPOSE. To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS. The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens (4×1.2×12 mm) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. RESULTS. The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) (P<.001). For LDC, AS surface treatment showed the highest FPBS results (100.31 ± 10.7 MPa) and the lowest values were obtained in RNC (23.63 ± 9.0 MPa) for control group. SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. CONCLUSION. The surface treatment of sandblasting or HF acid etching in combination with a universal adhesive containing MDP can be suggested for the adhesive cementation of the novel CAD/CAM restorative materials.
- Subjects
DENTAL fillings; BOND strengths; CAD/CAM systems; DENTAL resins; SURFACE preparation
- Publication
Journal of Advanced Prosthodontics, 2017, Vol 9, Issue 6, p439
- ISSN
2005-7806
- Publication type
Article
- DOI
10.4047/jap.2017.9.6.439