We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
Characterization of single crystal silicon and electroplated nickel films by uniaxial tensile test with in situ X-ray diffraction measurement.
- Authors
NAMAZU, T.; INOUE, S.
- Abstract
In this study, mechanical properties of micron-thick single crystalline silicon (Si) and electroplated nickel (Ni) films at intermediate temperatures are investigated by means of X-ray diffraction (XRD) tensile testing. The developed tensile test technique enables us to directly measure lateral (out-of-plane) elastic strain of microscale crystalline specimen using XRD during tensile loading, and determines Young's modulus, Poisson's ratio and tensile strength of the Si and Ni specimens. The specimens, measuring 10 μm thick, 300 μm wide and 3 mm long, are prepared through a conventional micro-machining process, and the ultraviolet lithographie galvanoformung abformung (UV-LIGA) process including a molding and an electroplating. The Si specimens, showing brittle fracture at room temperature (R.T.), have average Young's modulus and Poisson's ratio of 169 GPa and 0.35, respectively, in very good agreement with analytical values. The Ni specimens, showing ductile fracture, have those of 190 GPa and 0.24, lower than bulk coarse grained Ni. Young's moduli of both the Si and Ni specimens decrease with increasing temperature, but Poisson's ratios are independent of temperature. The influence of specimen size on elastic-plastic properties of the specimens is discussed.
- Subjects
SILICON crystals; NICKEL films; MECHANICAL properties of thin films; X-ray diffraction; ELECTROPLATING; ELASTICITY; DYNAMIC testing of materials
- Publication
Fatigue & Fracture of Engineering Materials & Structures, 2007, Vol 30, Issue 1, p13
- ISSN
8756-758X
- Publication type
Article
- DOI
10.1111/j.1460-2695.2006.01043.x