We found a match
Your institution may have access to this item. Find your institution then sign in to continue.
- Title
A Correction Method for Wet Gas Flow Metering Using a Standard Orifice and Slotted Orifices.
- Authors
Tomaszewska-Wach, Barbara; Rzasa, Mariusz; Kouzoudis, Dimitris; Hauser, Peter
- Abstract
Flow measurements that utilize differential pressure meters are commonly applied in industry. In such conditions, gas flow is often accompanied by liquid condensation. For this reason, errors occur in the metering process that can be attributed to the fluctuations in continuous phase parameters in the flow. Furthermore, the occurrence of a dispersed phase results in flow disturbance and dynamic pressure pulsations. For the above reasons, new methods and tools are sought with the purpose of performing measurements of gas-liquid flows providing measurement results that can be considered as fairly accurate in the cases when flow involves a liquid phase form. The paper reports the results of a study involving measurement of wet gas flow using differential pressure flowmeters. The experiments were conducted for three constant mass air flow rates equal to 0.06, 0.078 and 0.086 kg/s. After stabilization of the air flow rates, water was fed into the pipe with flow rates in the range from 0.01 to 0.16 kg/s. The research involved a standard orifice and three types of slotted orifices with various slot arrangements and geometries. The analysis focused on the effect of orifice geometry on the flow metering results. On the basis of the results, it was found that the slotted orifice generates smaller differential pressure values compared to the standard orifice. The water mass fraction in the gas leads to overestimated results of measurements across the flowmeter. Regardless of the type of the orifice, is necessary to undertake a correction of the results. The paper proposes a method of gas mass flow correction. The results were compared with the common over-reading correction models available in the literature.
- Subjects
GAS flow; FLOW meters; DIFFERENTIAL pressure flowmeters; AIR flow; GAS-meters; ORIFICE plates (Fluid dynamics); PIPE flow; STEEL pipe
- Publication
Sensors (14248220), 2021, Vol 21, Issue 7, p2291
- ISSN
1424-8220
- Publication type
Article
- DOI
10.3390/s21072291